Gasmonitor is an expandable microprocessor-controlled
19 inch rack based gas and fire detection system which
controls up to 16 channels per rack. Each channel has
its own dedicated gas or fire detector input card
controlling either one gas detector or two fire zones
(monitoring up to 20 fire detectors per zone).
Designed to meet the requirements of large
installations which need centralised hazard monitoring
and the ability to monitor at several alarm levels.
Gasmonitor offers the ultimate in user-configuration
through its microprocessor control and RS232
interface. A suitable IBM compatible PC and Crowcon's
SetGmon software makes set up and configuration of
Gasmonitor quick and easy. Once configured, routine
daily adjustments can be made without fuss from the
front control panel of Gasmonitor. And Gasmonitor is
equally suited to new and retrofit applications, as it
is compatible with the vast majority of gas and fire
detectors - including infrared and optical types -
currently in use.
:Capacity for up to 16 detector input cards per
:Three levels of alarm per channel.
:Double pole changeover contact per alarm level
monitoring : Detector fault monitoring for open
circuit and short circuit conditions.
calibration :One man calibration is possible.
set up : "SetGmon" and "Log
Manager" software make configuration and
datalogging of Gasmonitor simple via an IBM
compatible computer running Windows software
Routine calibration can be carried out from the
controls on the front panel.
number of outputs : Up to 16 software configured